Change a motor with low(er) KV rating or change another ESC with high(er) Amperage. Continue to use the ESC after releasing the throttle trigger to neutral position, but you need to check if the chassis is overweight, the KV of the motor is too high or you play too aggressive.Ħ. The over-current protection was activated due to overload, the Green LED flashed a short, triple flash that repeats.ĥ. If use a 3S, please set "LiPo Cells" manually if use a 5S/7S LiPo, please set "LiPo Cells" to "Auto Calc." and "Cutoff Volt" to "Disabled".ĥ. Used odd number of cells (3S/5S/7S) and set "LiPo Cells" to "Auto Calc.".Ĥ. Check the fan to see if it works normally, (continue to use the ESC after it cools down, or change a pinion with fewer teeth, a motor with low KV rating to reduce load.Ĥ. Motor Limit: With 6S LiPo/18S NiMH: KV 1500 (5892 size motor) With 8S. The ESC temperature was too high and got the thermal protection activated, the green LED on the ESC flashed a short, single flash that repeats.ģ. Hobbywing Ezrun MAX6 Combo SL 4985 1650kV Sensorless The Hobbywing EZRun MAX6 V3.
If it's NiMH, then please disable the LVC protection.ģ.
(The Calibration video will be next)I hope this will be helpful.
The LVC protection was activated, the red LED flashed a short, single flash that repeats.Ģ. Install a new Ma圆 8s Waterproof ESC from Hobbywing into the Traxxas X-Maxx 6s. Consult with transmitter manufacturer, or change another transimtter that can control longer distance/wider range.Ģ. HobbyWing (HW30105000) Ezrun Brushless ESC MAX6 V3 160A BEC 6A 3-8s 1/5 for top prices / prompt supply / from a specialist dealer at > buy online.